ARC-FLASH is one of the few professional Photocatalyst manufacturers with the fixation technologies of direct spraying globally and due to this ARCFLASH can provide a complete spraying service. The special spraying gun of ARC-FLASH is particularly made by Meiji Industry of Japan and can spray 1μm bubbles covered by the binder layers, through which TiO2 will attach on the bubble surfaces. Once bubbles are sprayed and attached on the surface of objects, it would be extruded and become half-sphere. Then the surface tension caused by the pressure inside bubbles will push TiO2 forward and stay on the bubble surfaces to meet light for reaction. Owing to the fixation technologies, ARC-FLASH Photocatalyst can be directly sprayed on the surfaces of any materials including organic matters. The decomposition problem is wisely avoided because ARC-FLASH Photocatalyst will not directly contact materials, unlike other Photocatalysts. It is unnecessary to take steps of protecting organic materials by coating inorganic matters before processing. The technique simplification and extension of application ranges are the fruits brought by the fixation technologies of ARC-FLASH Photocatalyst.

Turning Dry and Firm Instantly

Photocatalysts of other brands are watery and hard to dry after spraying and even need being heated under high temperature, which are quite inconvenient. Unlike them, ARC-FLASH Photocatalyst can dry in seconds after spraying on rough surfaces (e.g. wall, wood), and in less than 30 seconds on glossier surfaces (e.g. tiles, marble), so the feature of drying instantly o makes it very convenient to apply without affecting the construction environment.
ARC-FLASH Photocatalyst will not be erased by touch after being dried, and its hardness could reach the maximum (Scrub resistance over 2000 times-Test by the Bureau of Standards, Metrology and Inspection, R.O.C.) in 10~14 days, which is even harder than the paint of automobiles. The layer will last long on the surfaces of objects and will not be damaged unless being rubbed with hard things.

Three Essential Elements

Although ARC-FLASH Photocatalyst can be conveniently applied to surface processing, there are three inseparable essential elements:
1. ARC-FLASH Photocatalyst material
2. Specialized spraying gun
3. Qualified technician with arc-flash processing admission